Identificador: 675
Abierta
ID de articulo : # 675 se ha agregado a su lista de deseos.
Descripción
PARTE # 11802 - ASTILLADOR - SCHUTTE 1360
IN GOOD CONDITIONS, AS-IS
Top infeed is 21-1/2" x 23".
Currently has 1" thick swinging hammers.
Screen included (not installed) has 1/2" dia. round holes.
Has been modified to a pneumatic discharge.
Includes sub base, motor pedestal and permanent magnet installed in infeed chute.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CALIBRADORA - PULIDORA 54” ANCHO
PARTE: 11760 - CALIBRADORA - PULIDORA 54” ANCHO
9 - CALIBRADORA-PULIDORA IND
G.H 54
AMXmachinery
LIJADORA BANDA ANCHA – 37” ANCHO – 2 LIJAS – TIMESAVERS
PARTE: 12239 – LIJADORA BANDA ANCHA
– 37” ANCHO – 2 LIJAS – TIMESAVERS
USADA – BUENAS CONDICIONES
Electric 208/230
volt, 60 cycle, 3 phase
Hours
on meter: NA
Timesavers
2300 series
37"
wide sander with 2 sanding heads
25hp
and 20hp sanding head motors
8"
diameter rubber contact drum on first head
2nd
head is combination drum and polishing platen
37"
x 75" sanding belt size
Variable
feed speed 15 - 45 fpm
2
load meters (1 per sanding head)
...
AMXmachinery
PARTE: 3HP-EMA-300 – CABECEADORA - ESCOPLO Y ESPIGA CONTINUA PARA TABLAS Y PISOS – 40-300 MM ANCHO
PARTE: 3HP-EMA-300 – CABECEADORA - ESCOPLO Y ESPIGA CONTINUA PARA
TABLAS Y PISOS – 40-300 MM ANCHO
Nuevo con garantía
Specification:
1.Max.
/ Min. Width: 300mm / 40mm 2.Max.
/ Min. Thickness: 10mm / 35mm 3.Min.
Board Length: 270mm 4.Max.
Board Length: Unlimited 5.Max.
Board Weight: 15kgs 6.Cutterhead
Spindle Motors: 5-1/2HP x2 (Optional: 7-1/2HP x2 or 10HP x2) 7.Feeding
Pressure Roller Motor: 1HP W/1HP Inverter 8.Infeed
Conveyor Table Motor: 1/2HP (Optional: Variable Feed 1H...
AMXmachinery
SIERRA RADIAL 4.5 HP
PARTE # SIL-DC-SBR14-45 - SIERRA RADIAL - MOTOR 4.5 HPNueva con garantiaMotor 4.5 HP, 220V, 60Hz, 3 fasesMedidas de la mesa 34-1/2” x 43-1/4”Diámetro del disco 14”Diámetro del eje 1”Máxima capacidad de corte transversal 24-3/8”Máximo espesor de corte 4-1/8”Movimiento angular del brazo 45 - 0 - 45 gradosMovimiento angular del motor 0 – 22 – 45 – 90 gradosGiro del motor 0 – 180 gradosPeso de la maquina 200 kilosTipo de empaque 1 caja