Identificador: 251
Abierta
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE # 12WG-UNIMAT 218 - MOLDURADORA - 6 CABEZALES
MOLDURADORA AUTOMATICA
6 CABEZALES
CARACTERISTICAS GENERALES:
KW (HP) rpm Tool cutting circle
1 - 7,5 (10) with Electronic Brake 6000 5“ – 5-11/16“
2 - 7,5 (10) with Electronic Brake 6000 5“ – 7-7/8“
3 - 7,5 (10) with Electronic Brake 6000 5“ – 7-7/8“
4 - 11 (15) with Electronic Brake 6000 5“ – 7-7/8“
5 - 15 (20) with Electronic Brake 6000 5“ – 7-7/8“
6 - 7,5 (10) with Electronic Brake 6000 5“ – 8-7/8“
Tool arrangement BRLTTB
Working width 3/4“ – 9“
Working height 5/16“ – 4-3/4“ (with tool cutting circle 5”)
Feed Speed-variable with inverter 20 – 100 feet per minute
DigiSet (double mechanical readouts) for left and top radial
adjustments. One readout is for the tool size and the other for the
finished wood dimension.
Six driven feed roller shafts from above
Two driven steel rollers in the machine table
Axial setting range of feed roller opposite the left tool holder 1 3/8”
Extension of the feed shaft opposite the left tool holders to 6”
Axial setting range of vertical spindle 3 -1/8 in.
Axial setting range of horizontal spindle 1 -3/4 in.
(1st bottom 3/16 in.)
All spindles diameter 1 -1/2"
Mechanical readouts on top spindle chip-breakers and pressure shoes.
Pressure shoe in front of left tool holder, incl. 2 lateral pressure rollers.
Receding chipbreaker in front of top spindles.
6 Additional set of spacing collars, clamping length 6-11/16”, diameter 1-1/2"
Operating voltage- 3 phase, 460 Volt, 60 Cycles according to US regulations
Straightening table, 6-1/2 ft (incl. edge jointing fence)
Machine table and fences chromium-plated (excluding infeed table and special table plates)
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 1SL-DC-HQ400-3A - TORNO - TALADRO DE AVANCE AUTOMATICO 3 EN 1
PARTE: 1SL-DC-HQ4003A - TORNO - TALADRO DE AVANCE AUTOMATICO 3 EN 1NUEVO CON GARANTIADESCRIPCION:- MOTOR 1 HP, 220V, 60 Hz, 2 FASES- HACE ROSCAS MILIMETRICAS Y ESTANDARTORNO:- CAPACIDAD DE VOLTEO: 280 MMDISTANCIA ENTRE PUNTOS: 350 MMDIAMETRO DEL CHUCK: 100 MMVELOCIDADES: 7 VELS (160-1360 RPM)HUSILLO: 19 MMTALADRO:BROQUERO: 1.5 - 13 MMCARRERA DEL HUSILLO: 80 MMCAPACIDAD DE GIRO DE LA CABEZA DEL TALADRO: 90 GRADOSVELOCIDADES: 14 VELS (117-1300 RPM)MEDIDAS TOTALES: 42" LARGO X 23" ANCHO X 35" ALTO...
AMXmachinery
PARTE: 12474 - PINCH ROLLER - EVANS
PARTE: 12474 - PINCH
ROLLER - EVANS
USADA - BUENAS CONDICIONES
Safety Gates on In-Feed and Out-Feed
Solid Top and Bottom Rollers
Feed Rate: 50’ FPM
Maximum Width: 62”
Maximum Thickness: 2”
Thickness adjustable by spacers
Work Height: 30-1/2”
Drive Motor: 1/2 HP
Electrical: 120 V, 1 PH,
60 Hz
Air Requirement: 100 PSI
AMXmachinery
PROFILE KNIFE GRINDER - RONDAMAT 960
PARTE: 12306-E - PROFILE KNIFE GRINDER - RONDAMAT 960USED - GOOD CONDITION9-3/8″ max. arbor lengthTool dia. 11-3/4″ max. to 4″ minGrinding wheel speed inverter controlledGrinding wheel speeds from 1,500 to 3,000 RPM 1.5 HP motorhydro-clamping of grinding wheel to arborSetting gauges for axial constantAxial clearance angle 0-20 degreeOn board diamond wheel dressing8-7/8″ max. 6″ min. grinding wheel dia
13-gal. coolant tank w/ 1.2 HP pump
AMXmachinery
TALADRO MULTIPLE HORIZONTAL
PARTE # 2TA-BR-52 – TALADRO MULTIPLE HORIZONTAL DE 1 LADO – 50” LARGONew with warrantySuitable and affordable for industrial and small workshop use.Capable of using "multiple drill head" for the drill distance less then 2".Easily adjust the drill position and add more drill spindles.Pneumatic clamp and drill head travel operated by foot pedal, hands free.Pneumatic and hydraulically stroke control for max. drilling power.Each spindle can be horizontally adjusted in position quickly.Cast iro...