Identificador: 230
Abierta
ID de articulo : # 230 se ha agregado a su lista de deseos.
Descripción
PARTE # 2AM-410 - TROMPO/PULIDOR CON ALIMENTADOR INTEGRADO PARA MOLDURAS RECTAS Y CURVAS
Shaper Motor: 7.5 HP Belt Driven
Shaper Spindle Speed: 4000-7000 rpm
Shaper Spindle: 1-¼" Dia.
Sander Motors: 1.5 HP Direct Drive
Sander Spindle Speed: 400-1800 rpm
Sander Spindles: 1" Dia. by 4" Tall
Voltage: 208-240V 3ph, 30A
208-240V 1ph, 40A
440V 3ph, 15A
Conveyor: 6" Wide, 4 rows of tires
Vertical Adjustment: Yes, with digital counters
Horizontal Adjustment: Yes, with digital counters
Sanding Wheel Tilt: 60º Forward; 40º Back
Fence: 5 adjustable stops
Table Height: 36 inches
Size: 75" x 36" x 54"
Weight: 1325 lbs
Plantilla Centradora para curvas - opcional
Designed and manufactured to give years of dependable service, the Larick 410 will shape and sand a wide variety of workpieces. Features include a 6" wide feed chain with four staggered rows of hold down tires; front adjusting handwheels with digital readouts for horizontal and vertical shaper and sander positions; AC inverter controlled variable speed for shaper, sanders, and feed featuring digital readouts for speed and load; floating heads are optional which allow shaping and sanding of arched panels. The user friendly design makes setup and profile changeovers quick and easy.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES – 254 LITROS
PARTE:
2PG-DRAGON24 – HORNO PARA CERAMICA, VIDRIO, METALES – 254
LITROSNuevo con garantíaMax. Temperatura: 1287 grados centígrados16500 Watts, 69 Amps
Medidas interiores: 610 mm ancho x 610 mm fondo x 686 mm
altoPotters who struggle with top-loading kilns will enjoy the Dragon. The door
swings open 160 degrees on a heavy ¾” steel rod with sealed bearings. Two
spring-loaded latches press the door tightly closed.Quick to
loadIf you
fire ware that is similar in size from ...
AMXmachinery
TORNO METAL
TORNO DE PRECISION PARA METAL 4-1/8" SPINDLE BORE & FREE TAPER ATTACHMENTGT-2040 - 20"x40", 4-1/8" bore, 12 spd, 10 HP, 220/440VGT-2060 - 20"x60", 4-1/8" bore, 12 spd, 10 HP, 220/440VGT-2080 - 20"x80", 4-1/8" bore, 12 spd, 10 HP, 220/440VGT-2680 - 26"x80", 4-1/8" bore, 12 spd, 15 HP, 220/440VGT-26120 - 26"x120", 4-1/8" bore, 12 spd, 15 HP, 220/440VGT-3280 - 32"x80", 4-1/8" bore, 12 spd, 15 HP, 220/440VGT-32120 - 32"x120", 4-1/8" bore, 12 spd, 15 HP, 220/440V
AMXmachinery
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"
PARTE: 2CA-RM30100AT - BASTONERA MULTIPLE – 1-1/8" x 4"Nueva con garantíaPara palos de escoba, trapeadores y recogedoresAlta produccionCapable of producing multiple rods or two-sided moulding at high production rate.• It is built with top and bottom cutter spindle, typically for cutting wood board into round rods.• Suitable for cutting wood board into round rods. When cutters are replaced with planer cutter heads, this machine can perform double-sided planing or moulding.• It can use ...
AMXmachinery
PARTE: 12169 – SIERRA OPTIMIZADORA – DIMTER WEINIG S50
PARTE: 12169 – SIERRA OPTIMIZADORA –
DIMTER WEINIG S50
USADA – MUY BUENAS CONDICIONESVideo1: https://vimeo.com/541891991