Identificador: 2142
Abierta
ID de articulo : # 2142 se ha agregado a su lista de deseos.
Descripción
PARTE: 2PR-100 - COLECTOR DE ASERRIN - MODULAR - MOTOR 10 HP
Nuevo con Garantía
Size: 90 cm ancho x 275 cm largo x 275 cm alto
Filtros: 18 filtros en total 19.33 m²
Hardware:
~ Reverse incline material handling impeller
~ 10 gauge construction
~ Pneumatic vibrational pack
~ 10 HP Siemens Cast Iron Motor
~ 10” Diameter Filters
~ Interior baffle to assist in even filling
Specs:
~ 5000cfm @ 6” Static Pressure with 15” duct (This is the size of our inlet, no reducer needed.)
~ 4500cfm @ 6.5” Static Pressure with 14” reduction inlet. (This is recommended trunk size.)
~ 3200cfm @ 8.5” Static Pressure with 12” reduction inlet.
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2EX-DC-2100 - COLECTOR DE ASERRIN CON CICLON
PARTE: 2EX-DC-203C – COLECTOR DE ASERRIN CON
CICLON – MOTOR 3 HP – 1785 CFMPARTE: 2EX-DC-250 – COLECTOR
DE ASERRIN CON CICLON – MOTOR 5 HP – 2975 CFMPARTE: 2EX-DC-275 – COLECTOR DE ASERRIN CON CICLON – MOTOR 7.5 HP – 4850 CFMPARTE: 2EX-DC-2100 – COLECTOR DE ASERRIN CON CICLON – MOTOR 10 HP – 6400 CFMNuevo con garantía1 micron filter bagsDrums not includedLow noise operationstandard 1 micron filterheavy duty dynamically balanced
impellersheavy gauge steel con...
AMXmachinery
SIERRA MULTIPLE PARA PANELES - MULTISCORE
PARTE: 12197 - SIERRA MULTIPLE PARA
PANELES - MULTISCORE
USADA – BUENAS CONDICIONESMarca
: Multiscore Panel Machinery
Working
wide 1250mm
Mod.
MR21
Manufacture
year 1995
Motor
20 HP, 220V
Infeed
speed from 0-20 ml/min
AMXmachinery
ENCHAPADORA
PARTE # 2TA-EB-3B - ENCHAPADORA DE CANTOS RECTOSPARTE # 2TA-EB-4B - ENCHAPADORA DE CANTOS RECTOSPARTE # 2TA-EB-5B - ENCHAPADORA DE CANTOS RECTOSPARTE # 2TA-EB-6B - ENCHAPADORA DE CANTOS RECTOS Automatic feed station for: Gluing, Pneumatic Guillotine, Double End Trimming, Top & Bottom Edge Trimming, Edge Polishing.The feed of edging material, by ** strip ** or coil is automatic and synchronously with panel feed.Total enclosure covers with dust hood connector.Heavy and rigid construction to ensur...
AMXmachinery
TORNO COPIADOR CON NAVAJA TRASERA
PARTE: 12149 – TORNO COPIADOR CON NAVAJA TRASERA
USADO – EN BUENAS CONDICIONES
– AS IS
Hydraulic unit 2HP
self-contained
Stock length 3" to
41.5"
Stock size 1" thru
3" square or round
Headspindle drive motor:
15HP
Spindle speeds 2250,
3200, 3825, and 4625
Turning rate up to 600
pieces per hour
Hopper fed