Identificador: 1886
Abierta
ID de articulo : # 1886 se ha agregado a su lista de deseos.
.jpg)
.jpg)
.jpg)
Descripción
PARTE: AMX-10120 - EXTRACTOR DE AIRE - INDUSTRIA - RESTAURANT - COCINA - MOTOR 10 HP - LOREN COOK
USADO - MUY BUENAS CONDICIONES
ACERO INOXIDABLE
MARCA: LOREN COOK COMPANY
MODELO: 330 CPA - EF-1
HECHO EN USA
FABRICADO EN ALUMINIO - RUEDA INTERIOR Y CABINA EXTERIOR DEL EXTRACTOR
FABRICADO EN ACERO - ESTRUCTURA DONDE VA EL MOTOR, LA POLEA Y LA FLECHA EXTERIOR
MOTOR BALDOR 10 HP, 208-230/460V, 3 FASES
MEDIDAS TOTALES: 63” ANCHO X 52” FONDO X 67.5” ALTO
MEDIDA ENTRADA: 41” DIAMETRO ABERTURA CEJA
MEDIDA ENTRADA: 22” DIAMETRO ABERTURA ADENTRO
MEDIDA SALIDA SUPERIOR: 36” ANCHO X 25” FONDO
PESO APROXIMADO: 550 KG
==============================================================================================
Centrifugal unit with a welded backward inclined aluminum wheel.
Fully welded aluminum housing that meets AMCA 99, Type ‘A’ spark resistant construction guidelines.
Additional application includes corrosive airstream, general ventilation and up to 300º restaurant exhaust.
FEATURES
Fully welded aluminum backward inclined wheel
Full welded aluminum housing
Standard construction meets AMCA Type ‘A’ spark resistant construction
Housing field rotatable one of eight discharge position
Available in arrangement 10 (Belt drive)
Available in arrangement 4 (Direct drive)
Removable discharge flange
Lifting lugs
Cast regreasable bearings
CONSTRUCTION
Housing Material: Aluminum, Steel
Finish: Lorenized ™
Ventilator Type: Blowers/Utility Sets
Impeller: Centrifugal
Bearings: L-50, over 200,000 hours
CONFIGURATION
Mounting: Roof (Curb Mount), Roof (Rail Mount), Floor
Drive Type: Direct Drive, Belt Drive
Motor: AC
Class: 1, 2
Discharges: THD, TAD, TAU, DB, UB, BHD, BAU
Arrangements: 4, 10
Rotatable Housing: Yes
Max Operating Temp (Standard Construction): 180°F
Max Operating Temp (Alt. Construction): 300°F
Speed Control: VFD, Vari-Flow, SimpliDrive
Flow: Supply, Exhaust
Filtration: Unfiltered
The information provided was gathered from literature, internet &/or physical inspection.
It is thought to be accurate; but not guaranteed.
Pago y Devoluciones
- Forma de pago
- PayPal, Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Envio
- Ubicación de elemento de riesgo
- 31104, Chihuahua, México
- Retiros
- comprador debe recoger
- Devoluciones aceptadas
- No
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ESCOPLO VERTICAL
PARTE # 1SIL-DC-MS3840 - ESCOPLO VERTICAL - MOTOR 1 HPNUEVO CON GARANTIAMotor1 H.P., 110V.,60Hz, MonofásicoCapacidad del cortador1/4” - 1”Zanco del cortador3/4”Desplazamiento del cabezal210 mm.Velocidad1720 rpm.Tamaño del buje del escoplo3/4”Capacidad del broquero3 - 16 mm.Mov. lateral de la mesa180 mm.Mov. transversal de la mesa100 mm.Dimensiones de la mesa450 x 150 mm.Altura máxima de la madera200 mm.Ancho máximo de la madera140 mm.Peso139 Kg.Tipo de empaque1 caja
AMXmachinery
SIERRA ESCUADRADORA VERTICAL - STANDARD - CAP. 168” X 66” X 3-1/8”
PARTE: 2ST-STANDARD - SIERRA
ESCUADRADORA VERTICAL - STANDARD - CAP. 169” X 66” X 3-1/8”
NUEVA CON GARANTIA• Swiss made quality for accuracy and
durability!• Very stable, all welded steel frame suitable
for free-standing or wall-mount installation• Heavy-duty panel support rollers with
integral foot pedal braking system• Convenient, sturdy, two-section mid-shelf
with moveable aluminum fingers allows comfortable working of small parts and ability
to stage material on one...
AMXmachinery
OVER ARM ROUTER
PARTE # 2EV-2480 - OVER ARM ROUTER - EVANS 2480 - 220 Volt, 3 Phase, 10 amp- Standard Features:- 3 HP High frequency router motor- 80 PSI Required- 18,000 RPM- Working height 33"- Includes router bit Part # 08018- 30" x 48" cutting area- Crated weight 1500 LBS. Shipping dimensions 69” long X 72” wide X 65” highOptional:- 440 Volt, 3 Ph. 5 amp, 80 PSI
AMXmachinery
TRISCADORA 10-80 MM
PART # 4VF-SV80MN - TRISCADORA PARA SIERRA CINTAS 10 -80 MMNueva con garantiaInexpensive and easy-to-use. Possibility to choose the setting: left/right or left/right/straight. Adjustment of the feed pitch, of the setting height and of the tooth bending degree. Workbench model.Bandsaw Thickness [min-max]: 0,5 – 1,1 mmBandsaw Width [min-max]: 10 – 80 mm Setting Pitch [min-max]: 5 – 35 mmTwo types of setting: Net – Gross Weight: 7 – 9 kgMachine Dimensions [D x W x H]:...