Identificador: 1632
Abierta
ID de articulo : # 1632 se ha agregado a su lista de deseos.
Descripción
PARTE: 1AM - EXTRACTOR - CAMPANAS DE EXTRACCION PARA COCINA
-FABRICADAS EN ACERO INOX. P3, GRADO ALIMENTICIO
- PARTE FRONTAL, LATERALES, TECHO Y FILTROS EN LAMINA CAL. 20 CON GOTERÓN EN LAMINA CAL. 18
- SOPORTA FILTROS Y RESPALDO EN LAMINA GALVANIZADA
- INCLUYE FILTROS TIPO LABERINTO - INCLUYE CAPELOS PARA ILUMINACIÓN
- NO INCLUYE DUCTERÍA NI EXTRACTOR
|
Cantidad de
Capelos
|
Largo
|
|
1 |
1 m |
|
2 |
1.5 m |
|
2 |
2 m |
|
2 |
2.5 m |
|
2 |
3 m |
|
3 |
3.5 m |
|
3 |
4 m |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ARMADORA DE CAJONES
ARMADORA DE CAJONES PARTE: 2CK-JEN60Is designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machin...
AMXmachinery1
TORNO 26 X 80''
TORNO 26 X 80'' PARTE: 2GM-268026” x 80”, 4-1/8” bore, 10HPISO 9001 certifiedLarge spindle bore 4-1/8”Heavy Duty spindle D1-8Heavy Duty guideway width 16”Heavy Duty main motor 10HP4-Way Rapid Traverse16 spindle speeds from 25-1,600 rpm, 16 speeds54 kinds of inch threads, and 54 kinds of metric threadsThreading and feeding rate change without changing gearsSpindle is balanced, hardened and precision groundSpindle is supported at 3-point by h...
AMXmachinery1
CORTADORA DE METAL MECANICA
CORTADORA DE METAL MECANICA PARTE: 2GM-EPS-0810MShop our 8 foot mechanical shears that are capable of cutting up to 10 gauge mild steel and 14 gauge stainless. Our sheering machines are designed as a low maintenance design with an array of features that will add value to any machine shop. ISO 9001 certifiedAmerican design and Taiwan quality machineHD all steel construction for maximum rigidityPrecision driven gearboxFull length 30 strokes per minute60” lo...
AMXmachinery1
SIERRA MULTIPLE - RODILLOS - PIEZAS CORTAS
PARTE: 2CK-131HMMAIN FRAME, MACHINE BED & ENCLOSURE1 Piece – Extra Heavy 1 Piece Main Frame. Specially heat treated for maximum stability and minimum vibration43” (1.1 meter) long Adjustable Infeed Table (adjustable .4 inch) – measured from Btm. Head Infeed Bed Plate – head endAll Bedplates, Tables and Fences are Hard ChromedLift up sound and safety Enclosure including safety interlocks and good lightingDRIVE INCLUDESMaintenance free Full Cardan Shaft Drive to feedworks for balanced dr...