Identificador: 1527
Abierta
ID de articulo : # 1527 se ha agregado a su lista de deseos.
PARTE: 12306 - AFILADORA DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 960
AMXmachinery
Descripción
PARTE: 12306 - AFILADORA DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 960
USADA – MUY BUENAS CONDICIONES
9-3/8″ max. arbor length
Tool dia. 11-3/4″ max. to 4″ min
Grinding wheel speed inverter controlled
Grinding wheel speeds from 1,500 to 3,000 RPM
1.5 HP motor
hydro-clamping of grinding wheel to arbor
Setting gauges for axial constant
Axial clearance angle 0-20 degree
On board diamond wheel dressing
8-7/8″ max. 6″ min. grinding wheel dia
13-gal. coolant tank w/ 1.2 HP pump
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PRENSA DE MEMBRANA – 2 MESAS – 4 X 8 PIES
PARTE: 2TA-PT-VAC482 – PRENSA DE MEMBRANA – 2 MESAS – 4 X 8 PIESNueva con garantíaSpecial design for using heating and vacuum pressure to add form or film skin to a shaped, curved or uneven surface material. Also, it can perform as print heat transfer.Suitable for wood veneers or PVC sheets.Automatic controlled by PLC for suitable and easy operation.Double-layer and fully sealed heat preservation.Advance heating temperature digital control by computer for the best adjustable heating speed...
AMXmachinery
PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6
PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6USADO – BUENAS CONDICIONES - RECONSTRUIDOMax trim width 7.5"Shear Cutting ActionRotor Speed 500 to 3,600 rpm1 HP motorModel 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution. The open-rotor design facilitates free passage of air and material. Shear-cut action for paper and tough, thin film and foil. Total weight is 135 pounds17"L x 13.25W x 22.5H
AMXmachinery
BASTONERA – MOTOR 15 HP – CAPACIDAD ½” - 2” DIAMETRO – HAWKER 2000
PARTE: 12229 – BASTONERA – MOTOR 15
HP – CAPACIDAD ½” - 2” DIAMETRO – HAWKER 2000
USADA
– MUY BUENAS CONDICIONES
LARGOS MINIMOS: 16”
VELOCIDAD VARIABLE: 75 A 250 PIES LINELES POR MINUTOS
MOTOR PRINCIPAL: 15 HP, 3,600 A 5,000 RPM
MOTOR ALIMENTADOR: 5 HP
TAMANO MAQUINA: 42” W X 48” L X 46” H
TAMANO MAQUINA CON HOPPER: 42” W X 88” L X 46” H
PESO: 3,000 LBS
VARIOS RODILLOS DE ENTRADA Y SALIDA
VARIOS DIAMETROS DE CABEZALES
VARIOS JUEGOS ...
AMXmachinery
CORE BUILDER
PARTE # 2EV-6600 - CORE BUILDER - EVANS 6600Maquina para hacer el centro o la base de las cubiertas de cocinaThe Evans machinery model 6600 core builder produces a quality core every time. Within one pass, this machine bonds the build up to both sides of the panel using hot melt adhesive applies T-Mold for no drip edges and shapes your core to the required profile. The model 6600 Core Builder operates at a feed rate of 20 FPM as it travels on a non-skid straight line feed system. The model 6600 ...