Identificador: 119
Abierta
ID de articulo : # 119 se ha agregado a su lista de deseos.
Descripción
PARTE # SIL-DC-CM12.5-B -Â CEPILLO 12.5" PORTATIL
MOTOR: 2Â HP, 110V, 60 Hz, 1 FASE
CAPACIDAD DE CORTE: 12.5" X 6"
MAX. PROFUNDIDAD DE CORTE: 12.5" X 1.2MM, 3.2 MM X 5"
VELOCIDAD DE CABEZAL: 6500 RPM
CORTES POR MINUTO: 13,000
CANTIDAD DE CUCHILLAS: 2 PIEZAS (DOBLE FILO)
PESO:Â 34 KGS
TIPO DE EMPAQUE:Â 1 CAJA
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ESPIGADORA DOBLE DE CADENA - FRIULMAC
PARTE: 12416 – ESPIGADORA DOBLE DE CADENA - FRIULMAC
USADA - BUENAS CONDICIONESModel
ContouramatThe
ideal solution for double-end trimming and coping, with only one operator
required!Working
Length: 115 - 1500mm (4.52" - 59")Working
Width: 30mm - 250mm (1.18" - 9.84")Working
Thickness: 12mm - 50mm (0.47" - 1.96")Configuration:
Double-End Trim & Double-End Cope/ProfilingLeft
& Right Trim Motors: 4 HP EachTrim
Blade Diameter: 125mm - 180mmTrim
Blade Bore: 30mmLeft
& Right Cope/Prof...
AMXmachinery
MESA ARMADORA BASTIDORES - PIES 4X8
PARTE # 2RT-R275E/A - MESA ARMADORA DE BASTIDORES - PIES 4X84’x8’ Assembly TableClamp Arm with (3) Hold Down Cylinders(4) Universal Clamping Cylinders and Manifold45 Degree Vertical EaselSquaring Bars on Right and Left SidesPerforated Steel Table TopManifold with 1/4″ NPT Regulator/GageDesigned and Manufactured in the USAAdditional options for this machine include:R275A – Additional Beam AssemblyU300E05 – Additional Clamp Cylinder
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 -Â ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...
AMXmachinery
LAMINADORA DE MOLDURAS – PUR HOTMELT – CON ENGOMADORA
PARTE
# 4VE-VP350-KL6.5-W1C – LAMINADORA DE MOLDURAS – PUR HOTMELT – CON ENGOMADORA
Nueva con garantÃa
Hecha en EuropaLaminadora Sistema seteado rápidoEngomadoraPara recibir cotización formal y detallada avÃsenosNO
        STANDARD SPECIFICATIONS                                                                    QTY1
            2,5m
main body 4m cassette    Â...