Identificador: 247
Abierta
Descripción
PARTE # 32RM-M413 – MOLDURADORA – 5” ANCHO – 4 CABEZALES
NUEVA CON GARANTIA
CARACTERISTICAS
220V/60HZ/3PH
1) 1st bottom spindle:3kW, Φ40mm, 6000 RPM – 4 HP
2) right spindle: 3kW, Φ40mm, 6000 RPM – 4 HP
3) left spindle: 4kW, Φ40mm, 6000 RPM – 5HP
4) top spindle: 4kW, Φ40mm, 6000 RPM – 5 HP
Feeding motor: 3Kw – 4 HP
Stepless variable feed speed 10-33m/min
Feed beam :0.75kW
Working width: 20-130mm
Working thickness: 8-100mm
Individual motor to each spindle to ensure maximum cutting(Standard)
Hard chrom treatment has been adopted for the durability of the work table surface(Standard)
Equip with short-piece gear box for the shortest length of 180mm
Lengthened-type side pressure roller at the infeed entrance for effectively prevent wood running deviation
Multi-section pneumatic adjustment is adopted to the conveying pressure system
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
PARTE: 12629 - CONTORNEADORA – 2 FRESADORAS - BALESTRINI – MINI C
PARTE: 12629 - CONTORNEADORA – 2 FRESADORAS - BALESTRINI –
MINI C
USADA – BUENAS CONDICIONES
AMXmachinery
LINEA DE PINTURA – MOLDURAS - GAIDZINKI
PARTE: 12239 – LINEA DE PINTURA – MOLDURAS - GAIDZINKI
USADA – MUY BUENAS CONDICIONESVideo
1: https://vimeo.com/547804083
AMXmachinery
LIJADORA 52"
PARTE # 2TA-WS-DA5275 - LIJADORA - CALIBRADORA - 52" ANCHOCabezales: 2 cabezasCapacidad: 52" ancho x 75" largoWith the two head wide belt sander, you can accurate heavy sanding your stock with the first drum head and with the second combinational head you can give the unlimited fine finish.Rugged heavy-duty sheet metal construction designed for durability usage.Full power industrial motors drive sanding and auto infeed smoothly.Infeed and outfeed are spring loaded hold down rollers to ensure pos...
AMXmachinery
PART: 1AM-3011-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH - WITH GUIDE AND STOP
PART:
1AM-3011-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH - WITH GUIDE
AND STOPSIDE
ROLLER TABLES Use
with saws, planers, edgebanders, jointers, etc.New
with warranty120
cm (47”) length x 39 cm (15.35”) widthVariable
height 83 - 87 cm (32.5 - 34.25”)Support
large and heavy wood pieces and wood panelsAdjustable
heigh to pair with your current machines7 galvanized steel ball bearing rollers-
1 back guide to avoid material to fall-
1 block stop to make same size ...