Identificador: 196
Abierta
Descripción
PARTE: 2TA-EB-3ESB - ENCHAPADORA DE CANTOS
- Automatic feed station for: Gluing, Front & Rear End Trimming, Top & Bottom Edge Trimming, Top & Bottom Edge Polishing,
- Total enclosure covers with dust hood connector.
- Heavy and rigid construction to ensure necessary accuracy and stability.
- To guarantee straight-line feed of the panel, a double row of rubber rollers is off centered onto top pressure beam and bottom feed track with rubber calibrated pads is running on cylindrical guide.
- The top pressure beam is supported with two reinforced columns are equipped with visible linkages for thickness adjustment.
- The feed of edging material, by strip or coil is automatic and synchronously with panel feed.
- Extension rollers support for wider panels.
- The electric and pneumatic system is incorporated in the built-in control cabinets.
- Side Pressure Unit: Standard with one row of vertical rollers for straight edges.
- Gluing Unit: With the use of melt glue applied on straight Panel for edges banding.
- Double End Trimming Unit: Application for fine trimming front & rear edge by HIGH FREQUENCY saw motor
- Edge Trimming Unit: This top and bottom edge trimming unit is complete by cutter heads with two independent HIGH FREQUENCYmotors
- Polishing Unit: Apply the finest finish surfacing process on top and bottom edge.
| SPECIFICATIONS | EB-3ESB |
| Edging PVC Band Thickness | 0.0015” ~ 0.118” (0.4 ~ 3 mm) |
| Edging Band Width | 0.55” ~ 2” |
| Work Piece Thickness | 0.47” ~1.77” |
| Work Piece Minimum Length | 11” |
| Work Piece Minimum Width | 3.5” |
| Edge Band Feed Motor | 25 W |
| Gluing Motor | 60 W |
| End Trimming Saw Speed | 12000 RPM |
| End Trimming Motor | ½ HP |
| Edge Trimming Cutter Speed | 12000 RPM |
| Edge Trimming Motor | ½ HP x 2 |
| Polish Wheel Speed | 1400 RPM |
| Polish Motor | 1/8 HP X 2 |
| Feed Speed | 0 ~ 23 FPM |
| Feed Motor | ½ HP |
| Heating Element Power | 1250 W |
| Total Power | 4 HP (3 KW) |
| Power | 220V 3PH |
| Air Pressure | 90 PSI |
| Machine Size | 87" x 28" x 48" |
| N.W. | 950 LBS |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
BRIQUETEADORAS DE METAL - HYDRAULICAS
BRIQUETEADORAS DE METAL - HYDRAULICAS
NUEVAS CON GARANTIALas briqueteadoras de metal pueden compactar diferentes clases de materiales como
hierro fundido, aluminio, cobre, magnesio, titanio, molibdeno, metal, etc., en
bloques de alta densidad sin aditivos.Para mas información llámenos,Especificaciones:
Modelo
unidad
3CH-83A-160
3CH-Y83-160
3CH-Y83-230
3CH-Y83-300
3CH-Y83A-300
3CH-Y83-800...
AMXmachinery
PARTE: 2CA-RM70 - BASTONERA – CAPACIDAD 3/8” - 2-3/8” DIAMETRO
PARTE: 2CA-RM70 - BASTONERA –
CAPACIDAD 3/8” - 2-3/8” DIAMETRO
NUEVA CON GARANTIAThe unit is designed solely for shaping of round poles in wood working factory.The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.The cutting head has been proven flawless through experience and study of many years.The unite cuts out perfectly round rod or stick, such as flag pole, rattan, acrylic molde...
AMXmachinery
PARTE: 2BC-5TOB - TRITURADORA - PAPEL, CARTON, FOIL DE METALES FINOS - BLOAPCO - MODEL 5TOB
PARTE: 2BC-5TOB - TRITURADORA - PAPEL, CARTON, FOIL DE
METALES FINOS - BLOAPCO - MODEL 5TOB
Para papel, cartón corrugado y fibras pesadasBEST USES Removal of continuous film, Edge Trim and MatrixINDUSTRIES Converting, Paper, Film, Plastic, Non-woven, FoilsIDEAL FORpaperlight fiber boardcorrugated boardsolid bleached sulfate paperboardplastic filmfoil laminatespressure-sensitive stocklight, non-ferrous foils CAPABILITIESMaterials:
Paper, corrugated and heavy fiber boardTrim
Width max: 8 1...
AMXmachinery
ASTILLADORA PARA MADERA - HORIZONTAL - 40 HP
PARTE: 2VE-VTH-35/8/2VU
- ASTILLADORA PARA MADERA - HORIZONTAL - 40 HP
TRANSPORTADOR
VTBRATORIO 16” LARGO
NUEVA CON
GARANTIAApplication Description:Type of material to be ground: Wood – Pine, kiln driedForm of material to be ground: Rips from gang-rip, waste
wood from cut-offsTypical size of material to be ground: < 5” x 18” x 16’Required volume of material to be ground: 1,000 lbs/hrDesired screen or particle size: 3/4”Use of ground product: Not Specified SPECIFICATIO...