Identificador: 1297
Abierta
Descripción
PARTE: 12262 - ENCHAPADORA - CEHISA - PRO 8
USADA - MUY BUENAS CONDICIONES
220V, 3 FASES, 60 HZ
TOTAL HP 7.58
SINGLE LARGEST HP 5.58
TOTAL AMPS 17.2
GLUE TANK: M-5
STATIONS:
- END TRIMMING
- TRIMMING
- POLISHING
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ENGOMADORA 1 LADO – 63” ANCHO - QUICK
PARTE: 12132
- ENGOMADORA 1 LADO – 63” ANCHO - QUICK
COMO NUEVA – NUNCA USADA
Width capacity: 63"
Maximum opening: 1-3/4"
Feed rate: 64 FPM (single speed)
8.27" diameter grooved acid and heat resistant SBR
rubber covered glue rolls
6.9" diameter hard rubber covered doctor rolls
Glue spread and material thickness are manually adjusted
made by turning chrome plated hand wheels
Aluminum drip pan catches clean up water
Powered by 2 HP motor
Includes roll guards...
AMXmachinery
ASTILLADOR PARA TRACTOR - MAX DIAMETRO 8”
PARTE:
2EB-JMA-8 - ASTILLADOR PARA TRACTOR - MAX DIAMETRO 8”
NUEVA CON GARANTIAFeatures include:Reversible KnivesAdjustable BedbladeSafety Bar - to disengage the Feed RollerRotating Exit ChuteSpecifications include:Chips 8" wood, with Opening size of 8"X8"PTO Driven at 540 RPMFeed Rate is 36 Feet per minute185Lb Flywheel, with Total Weight of approx 850 LbsRecommended for 18-45 HP tractors
Some
basic assembly is required.
AMXmachinery
GUILLOTINA PA5A CHAPA - CASATI MACCHINE TSO TSI
PARTE: 12157 - GUILLOTINA PA5A CHAPA - CASATI MACCHINE TSO TSIUSADA – MUY BUENAS CONDICIONESCombined length- and crosscut veneer guillotineYear of manufacture 1980Cutting length mm 4.200Length of cross-cut mm 600Strip width max mm 700Cutting height mm 60Strip width min mm 25Digital readout YesSafety device YesCross cutting device YesCross-cut guillotine YesPressure beam hydraulicBlade drive hydraulicAvailability short-term, ex location customer!Operating status dismantled/ stored
AMXmachinery
ASERRADERO HORIZONTAL – 1 BANDA – MOTOR 30 HP
PARTE: 3HP-HP-LOG – ASERRADERO HORIZONTAL
– 1 BANDA – MOTOR 30 HP
NUEVO CON GARANTIA
SCRAGG MILLVideo: https://vimeo.com/572381491
Specification:
1.Working
Capacity: 120-400mm (D)
2.Balde
Elevation Distance from Conveyor: 10-235mm
3.Saw
Wheel Motor: 30HP
4.Elevation
Motor:1/4HP
5.Saw
Blade Tension by Hyd. Compensation System
6.Conveyor
Length: 4500mm
7.Hydraulic
Motor: 3HP
8.Saw
Wheel Dimension: 34"(D) x 2"(Thickness)
9.
Saw Balde Size: 5310mm(...