ID: 2578
Open
.PNG)
.PNG)
.PNG)
.PNG)
Description
CORTADORA MECANICA 8' x 10 Ga PARTE: 2GM-EPS-0810M
- ISO 9001 certified
- American design and Taiwan quality machine
- HD all steel construction for maximum rigidity
- Precision driven gearbox
- Full length 30 strokes per minute
- 60” long squaring arm with inch / mm scale
- spring hold-downs
- high grade carbon/chrome alloy steel blades and hardened to 62 hrc,
2-edge indexable upper blade and 4-edge indexable bottom blade
- Full length with full view finger guard
- Front supports and (2) side gauges
- Safety type foot pedal control
- Jog, single continuous auto operation modes
- 6” manual back gauge with one side handwheel
- 60” long squaring arm with inch / mm scale, mounted on right side of the table
- 2 each 24” front support arms
- full length finger guard
- Removable safety foot pedal control
- One set of upper & lower blades
Cutting Capacity Mild Steel - HRS (tensile 60,000 PSI) Stainless Steel (tensile 85,000 PSI) Soft Aluminum (tensile 28,000 PSI) min. thickness |
8' x 10Ga. 8' x 14Ga. 8' x 1/4" 22Ga. |
| Blade Lenght | 98" |
| Strokes per minute | 26 |
| Worktable height | 32" |
| Front support arm | 36" |
Back gauge | 26" Manual Back gauge |
Blade Rake Angle | 2.5 Degree |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery1
EXTRACTOR TUBOAXIAL DIRECTO
PARTE: 1AM - EXTRACTOR TUBOAXIAL DIRECTOPara uso de procesos comerciales e industriales, torres de enfriamiento, extracción de humo, gases en estacionamientos, viveros, etc.Carcaza de acero al carbón, pintada con pintura electrostática y horneada. Aspa de aluminio anti-chispa. Accionado por acoplamiento directo a un motor eléctrico.Características:– Diámetro de aspa desde 16″ hasta 26″.– Motores en voltaje 127/220V. y 220/440V.– Volúmenes de aire: 4,200 hasta 18,725 PCM. Presi...
AMXmachinery1
ENCHAPADORA DE CANTOS
PARTE: 2CK-MX350Is a compact edgebander capable of applying up to 3mm thick edge tape on cabinet parts and more. The counter rotating pre-milling cutters ensure optimum panel edge quality and squareness which result in a less visible glue joint. It comes equipped with high frequency motors on both the end trim and top & bottom trim. In addition it is equipped with PVC radius scraping and buffing units. User friendly controls and adjustments allow for efficient changeovers of edge tape th...
AMXmachinery1
MOLDURADORA – 5 CABEZALES – OMIL PLM 5
PARTE:
12351 - MOLDURADORA – 5 CABEZALES – OMIL PLM 5
USADA BUENAS CONDICIONESANCHO MAXIMO 160 MMALTO MAXIMO 90 MMLARGO MINIMO 200 MMCABEZALES 5500 RPM6 MOTORES POTENCIA TOTAL
45.5 HP
HECHA EN BRASIL
AMXmachinery1
PARTE: 2TA-GS-12C46M - ENGOMADORA DE TRANSPORTADOR - 12" ANCHO
PARTE: 2TA-GS-12C46M - ENGOMADORA DE TRANSPORTADOR - 12"
ANCHONueva con garantía4’ infeed, 6’ outfeed for easy gluing applicator setup.Grooved rubber roller for water-based wood working glue spreader.Removable stainless steel conveyor belt, glue pan, doctor blade and glue roll assembly for quick and easy clean-up.Use the adjustable stainless steel doctor blade to adjust the glue spread thickness.The glue applicator and conveyor are driven by industrial 1/2 HP total enclosure motor.All comp...