Identificador: 14
Abierta
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 2WA-CR70 – ASTILLADORA – MOTOR GASOLINA 38 HP, CAPACIDAD 7” DIAMETRO
7" x 12" Slab Style Opening
Auto Engage Fluid Coupler
Dual Active Rollers
Intellifeed
Kohler Gas Engine
Rotor Disc
Angled Rotor
Ledger Adjustment
Rapid Recovery Auto Reverse
Easy Start Tension Relief
Safety / Control Bar
360° Swivel Exit Chute
Easily Accessible Rotor Hood
Rotor Lockout Safety Lever
Double Banded V-Belts
Highway Tires
Electric Brakes
Torflex Suspension Axles
Signal Lights
Lockable Fuel / Storage Compartment
Enclosed Fuel Caps
DRIVE SYSTEM: | Double Banded Belt with Auto Engage Fluid Coupling | ENGINE: | 999 cc Kohler CH980 Engine |
CHIPPER CAPACITY: | 7" Diameter (Max. 10" Slab) | CHIPPER HOUSING OPENING: | 7" x 12" (Slab Style) |
ROTOR SIZE: | 28" Diameter x 0.75" Thick | NUMBER OF ROTOR KNIVES: | 4 Segmented |
KNIFE TYPE: | Hardened Tool Steel | ROTOR WEIGHT: | 190 lbs |
DIMENSIONS LXWXH: | 160" x 65.5" x 98.65" (Open) | HOPPER OPENING: | 25" x 35" |
DISCHARGE HOOD ROTATION: | 360 degrees | DISCHARGE HOOD HEIGHT: | 98.65" |
ROTOR RPM: | 1375 (Rotor) @ 3600 RPM (Engine) | WEIGHT: | 2750 lbs approx. |
TIRE SIZE: | ST205-75R14 |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12305 - CABEZALES PARA MOLDURADORA - LARGO 5” - FLECHA 1-13/16" - FLECHA 2-1/8"
PARTE: 12305 -
CABEZALES PARA MOLDURADORA - LARGO 5” - FLECHA 1-13/16" - FLECHA 2-1/8"SIN BUJE FLECHA 2-1/8"
USADOS - MUY BUENAS CONDICIONES
North American
Gladu hydro-lock
6 alas
20 grados
Diámetro interior - Flecha: 1-13/16"
Diámetro exterior: 6” (150 mm)
Largo 5” (130 mm)
AMXmachinery
PARTE: AMX-10160 - EXTRACTOR DE TUBO - DIAMETRO INTERNO 19-1/2” - MOTOR 3/4 HP
PARTE: AMX-10160 - EXTRACTOR DE TUBO - DIAMETRO
INTERNO 19-1/2” - MOTOR 3/4 HP
USADO - MUY BUENAS CONDICIONES -
TODOS LOS BALEROS NUEVOS
MOTOR 3/4 HP, 220/440V, 3 FASES, 60
HZ, 1500 RPM
DIAMETRO INTERNO: 19-1/2”
DIAMETRO EXTERNO: 22”
MEDIDAS TOTALES: 31” LARGO X 22” ANCHO
X 12” ALTO
CAUDAL: 8,712 M3/HR
HECHO EN MEXICO
AMXmachinery
DADOS PARA LA CORTADORA DE ESQUINAS
PARTE: 2AC-CM40A-DA – DADOS PARA LA CORTADORA DE ESQUINASDADOS DIFERENTES DISENOS Y MEDIDASSe usan también para cortar lamina para reconocimientos en las esquinas con redondos, etc. Cada dado corta 1 diseno y 1 medida en especificoDados de Corte Disponibles: Diseno - Medidas·Round - 1/8", 3/16", 1/4", 5/16", 3/8", 1/2" ·Notch - 1/8", 3/16", 1/4", 3/8", 1/2"·Scallop - 1/4", 3/8", 1/2"·Hole Punch - 3/32", 1/8", 3/16"·Slot - 1/8" x 9/16"·Chamfer - 1/4", 3/8"Capacidad de Corte:·Alumin...
AMXmachinery
TALADRO MULTIPLE DOBLE
PARTE # 2TA-BR-2142B - TALADRO MULTIPLE DOBLEThe machine is standard designed and constructed for Horizontal and Vertical boring units.Each 21 horrizontal and 42 vertical drills, drill head can be adjust to any degree position for X or Y axis combination construction drill.The machine is easy to operate. Simply press the foot switch and entire horizontal and vertical boring operations can be accomplished quickly.Vertical boring for drilling at longitudinal and cross directionThe vertical boring...