Identificador: 374
Abierta
Descripción
PARTE # SIL-DC-WL1000 - TORNO DE BANCO DE 1000 MM
MOTOR: 1/2 HP, 110V, 60Hz, 1 FASE
CAPACIDAD MAXIMA DE VOLTEO: 240 MM
DISTANCIA ENTRE PUNTOS: 1000 MM
VELOCIDADES: 4
PESO: 36 KGS
EMPAQUE: 1 CAJA DE 147 CMS LARGO X 22 CMS ANCHO X 37 CMS ALTO - 35 KG
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
REASERRADORA 5 SIERRAS 12"
PARTE # 2TA-BS-1212HR-5 - REASERRADORA HORIZONTAL - 5 SIERRASNUEVA CON GARANTIASpecificationsBS-1212HR-TNBS-1616HR-TNMax. Cutting Capacity12" x 12"16" x 16"Distance between Blade to Conveyor1/4" ~ 12"Saw Wheel Diameter28" x 2Saw Blade Length (Width)201" (2")201" (2" ~ 3")Saw Blade Speed6000 FPMFeed Conveyor Width12"16"Feed Speed (Variable)0 ~ 90 FPMMain Motor (Each Head)20 HP x 230 HP x 2Saw Blade Lift Motor1/2 HPFeed Conveyor Motor3 HPDust Hood4" x 6N. W.7200 LBS8600 LBSMachine was built with r...
AMXmachinery
LIJADORA DE BANDA ANCHA – 36” ANCHO – 1 BANDA – TIMESAVERS
PARTE: 12219 – LIJADORA DE BANDA ANCHA
– 36” ANCHO – 1 BANDA – TIMESAVERS
USADA – BUENAS CONDICIONES
0
to 8" thickness capacity, (manually adjusted via handwheel)
20
HP, 230/60/3 combination 4" diam. drum & platen sanding head
(60
- 65) durometer rubber covered contact drum
1
HP, 230/60/3 feed conveyor motor
(15
to 45 ft/min.) variable conveyor feed via variable speed pulley
24"
infeed & 8" outfeed conveyor, (4 jack screws for raise & lower)
Automatic
...
AMXmachinery
SIERRA ESCUADRADORA 3200 MM
PARTE: 2MK- BMS-3200-IR – SIERRA ESCUADRADORA – 3200 MM – 5 HP, 220V, 3 FASES – DISCO 12”Tailor made to provide high quality precise cuts in diverse angles with a max cut depth of 4 inches (100 mm) at 90º. It includes a 5 HP motor, cutting guides, miter guide, blade guard. The noise level of this equipment is 76.5 dB (the machine turned on only) up to 110 dB (with the machine on and the exhaust system on. The noise will vary in accordance with the location the machine is in and the ma...
AMXmachinery
PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR
PARTE # 11913 - PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR8.5 ft. wide with approximately 6 clamps per sectionClamps are standard 2-1/2” high jaws by 32” openingIncludes air tightener and panel flattenerMachine was new in 1983Good conditions