Identificador: 2591
Abierta
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
TORNO 14'' X 40'' PARTE: 2GM-GML-1440HD
The 14" x 40" Gap Bed Lathe with SINO DRO is the best machine money can buy. Fully equipped with a Taper Attachment, 8” 3-jaw chuck with one set reversible jaws, 10” 4-jaw chuck, 12” Face plate, 5 1/2” large steady rest with roller jaws, 2” follow rest, 4-way tools post, Foot brake Coolant system, and so much more list.
- ISO 9001 certified
- Large spindle bore 2-1/16”
- Heavy Duty spindle D1-6
- One-piece solid cast iron machine base
- Heavy Duty guideway width 10-1/4”
- Heavy Duty main motor 6 HP
- 16 spindle speeds from 45-1,800 rpm, speeds: 45/ 75/ 90/ 130/ 160/ 195/ 210/ 260/ 350/ 390/ 600/ 690 / 790 / 910/ 1,200/ 1,800 rpm
- 45 kinds of inch threads, and 39 kinds of metric threads
- Threading and feeding rate change without changing gears
- Spindle is balanced, hardened and precision ground
- Spindle is supported at 3-point by high precision bearings
- All gears and shafts are hardened and precision ground
- Guideways induction hardened and precision ground
- Automatic lubrication system in headstock and feed box
- Free SINO DRO; Installed
- Free Taper turning attachment; Installed
- Metal chuck guard with safety shut down when lifting chuck guard
- 8” 3-jaw chuck with one set reversible jaws
- 10” 4-jaw chuck
- 12” Face plate
- 5 1/2” large steady rest with roller jaws
- Oil pump on Apron for all guideways and leadscrews
- 2” follow rest
- Removeable gap
- 4-way tools post
- Foot brake
- Coolant system
- Halogen Work light
- Full length splash guard
- (2) dead centers and (1) reducing sleeve MT6/MT4
- Thread chasing dial
- Tool box and leveling pads
| Max. swing over bed | 14 7/8" |
| Max. length of workpiece | 40" |
| Max. swing over cross slide | 10 1/16" |
| Max. Swing in gap | 23 1/4" |
| Width of Bed | 10 1/4" |
| Effective length in gap to spindle | 8 1/2" |
| Effective length in gap to chuck jaws | 3 1/2" |
| Spindle bore | 2 1/16" D1-6 |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
PARTE: 12500 - SIERRA MULTIPLE – MEREEN JOHNSON – 50 HP
PARTE:
12500 - SIERRA MULTIPLE – MEREEN JOHNSON – 50 HP
USADA – MUY BUENAS CONDICIONES
Incluye:
Sierra Multiple
Volteador
Linea de corte con 6 cortadores rapidos
3 maquinas Industrial 18”
3 maquinas Irvington 16”
AMXmachinery1
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA - 1 LADO
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA
- 1 LADO
NUEVO CON GARANTIAOffers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length. The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long. The heads are accurately adjusted using mechanical digital readouts. The spiral insert heads produce an extremely smooth finish result. The tw...
AMXmachinery1
ROUTER DE PEDESTAL
ROUTER DE PEDESTAL 2CK-DR750Is the ideal solution for high volume routing and profiling of repetitive shapes. With its powerful 7.5 HP router which turns at an RPM of 10000 or 20000 RPM you can cut through solid wood or panel products with ease. Simply follow your profile with one of the guide pins included (1/4”, 3/8”, ½”) for fast and convenient routing operation. The machine is constructed with a solid welded steel frame and cast-iron tilting table. The large s...
AMXmachinery1
ASTILLADORA - VERTICAL - 15 X 4 PULGADAS
PARTE: 2TA-WG-1504V - ASTILLADORA - VERTICAL - 15 X 4 PULGADASFeatures:A specially designed, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting design allows aggressive cutti...