Identificador: 1254
Abierta
Descripción
PARTE: 12243 – PRENSA - GRABADORA DE MOLDURAS – DIFERENTS DISENOS – 2 MAQUINAS
USADA – BUENAS CONDICIONES
Mfg 1981
Electric 230 volt, 60 cycle, 3 phase
Press width 450mm (17.71")
Material max width 500mm (19.68")
Material Speed 200-1000 Meters per hr. (650 - 3200 ft)
Engraving depth 3mm
Dual propane torch heaters
Includes Wheels as shown (100 - 250 mm diameter wheels)
Shipping Footprint: 6 (length) x 6 (width) x 5 (height)
Weight: 2500 lbs
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SISTEMA SPRAY DE PEGAMENTO
PART # 11835 - ULTRASPRAY LAMINATING SYSTEM - MIDWEST AUTOMATION 22 2075En buenas condicionesSistema de spray de pegamento base Agua
AMXmachinery
PARTE: 12575 - SEPARADOR MAGNETICO DE BANDA
PARTE: 12575 - SEPARADOR MAGNETICO
DE BANDA
SIN USAR, EXCELENTES CONDICIONES
Unused,
“New” Conditions
Motor:
3 HP, 230/460V/3/60
Marca:
Wolverine
29-1/2”
wide x 70” long Belt
Motor:
WEG 3HP
Approximate
Weight/unit (kgs): 776
Aproximate
Pack Size/unit - L*W*H (mm) : 2276 * 1216 * 572
Speed
- It is fixed speed and can be changed with a controller.
Magnet
power is strong - the original design was to pull small scrap metal from sand
on conveyor belt.
AMXmachinery
PARTE: 12453 - TALADRO MULTIPLE - ADWOOD - DETEL M-2H
PARTE: 12453 - TALADRO MULTIPLE -
ADWOOD - DETEL M-2H
USADA - BUENAS CONDICIONES
AMXmachinery
PARTE: 3HP-EMA-300 – CABECEADORA - ESCOPLO Y ESPIGA CONTINUA PARA TABLAS Y PISOS – 40-300 MM ANCHO
PARTE: 3HP-EMA-300 – CABECEADORA - ESCOPLO Y ESPIGA CONTINUA PARA
TABLAS Y PISOS – 40-300 MM ANCHO
Nuevo con garantía
Specification:
1.Max.
/ Min. Width: 300mm / 40mm 2.Max.
/ Min. Thickness: 10mm / 35mm 3.Min.
Board Length: 270mm 4.Max.
Board Length: Unlimited 5.Max.
Board Weight: 15kgs 6.Cutterhead
Spindle Motors: 5-1/2HP x2 (Optional: 7-1/2HP x2 or 10HP x2) 7.Feeding
Pressure Roller Motor: 1HP W/1HP Inverter 8.Infeed
Conveyor Table Motor: 1/2HP (Optional: Variable Feed 1H...