Identificador: 224
Abierta
Descripción
PARTE # 2TA-SD-602T - LIJADORA DE MOLDURAS – 2 ARRIBA
PARTE # 2TA-SD-603TU - LIJADORA DE MOLDURAS – 2 ARRIBA – 1 LADO
PARTE # 2TA-SD-603TU - LIJADORA DE MOLDURAS – 2 ARRIBA – 2 LADOS
Nueva con garantia
Designed for high production moulding sanding of straight stick of solid wood, veneered panel and finish between coats with profile, angular, or straight edge.
Workpiece is through feed with power spring-load pressure rolls at top, without sliding for irregual surface.
The brush, flap wheel, pneumatic drum or profile sanding head to cover all the profile sanding.
Top sanding head can be adjusted in & out, up & down.
Side sanding head can be adjusted tilt, forward & backward and up & down.
Variable feeding 20" to 80" to get different setup easily.
Every sanding head can use profile disc, brush wheel or sand belt with sponge drum for fine, detail finish.
SPECIFICATIONS |
|
Max. Sanding Width | 6" |
Max. Sanding Height | 4" |
Min. Sanding Length | 13" |
Wheel Head |
|
Brush Wheel Drive Motor | 2 HP |
Brush Tilts (universal Heads Only) | 90° ~ 180° |
Max. Sanding Wheel Dia. (Top & Bottom) | 12" |
Max. Sanding Wheel Dia. (Side) | 8" |
Sanding Spindle Dia (top & Bottom) | 1-1/4" |
Sanding Spindle Dia. (Side Head) | 1" |
Spindle Speed | 0 ~ 3600 RPM |
Profile Platen Belt Head |
|
Range of Workpiece Width | 2" ~ 70" |
Minimum Length of Workpiece | 4" |
Range of Workpiece Thickness | 1/6" ~ 4" |
Simple Belt Head |
|
Sanding Belt Size | 6" x 20" |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MESA INDEXADORA – EVANS MACHINERY
PARTE: 12094 – MESA INDEXADORA – EVANS MACHINERYUSADA – EN BUENAS CONDICIONESManual Hand-Crank for Width AdjustmentBoard GuidesPneumatic Lock for WidthMaximum Substrate Size: 62" x 145"Minimum Substrate Size: 9" x 27"Air Requirement: 80 PSI
AMXmachinery
PARTE: AMX-10158 - EXTRACTOR - ALUMINIO - MOTOR 3 HP - NORTH AMERICAN MFG
PARTE: AMX-10158 - EXTRACTOR - ALUMINIO - MOTOR 3 HP -
NORTH AMERICAN MFG
USADO - BUENAS CONDICIONES
MARCA:
NORTH AMERICAN MFG. CO.
MODELO:
1-401
HECHO EN USA, CLEVELAND, OHIO
3 HP, 220/440V, 3 FASES, CONECTADO
A 220V, MARCA LINCOLN
BALEROS NUEVOS
MEDIDAS: 27” FRENTE X 20” FONDO X
29” ALTO
ENTRADA REDONDA: 5”
SALIDA CUADRADA: 4” X 4”
VOLUME CFM: 285
AMXmachinery
PARTE: AMX-10141 - ABANICO - 30” DIAMETRO - MOTOR ½ HP
PARTE: AMX-10141 - ABANICO - 30” DIAMETRO - MOTOR ½ HP
USADO - BUENAS CONDICIONES
30” DIAMETRO
16” FONDO
MODELO: 41NC07
MOTOR: ½ HP, 115V, 60 HZ, 1 FASE
RPM: 1,100/850
AMXmachinery
PARTE: AMX-10078 - AFILADOR Y TRISCADOR PARA SIERRAS CINTAS - TIMBERY SHARP-N-SET
PARTE: AMX-10078 - AFILADOR Y TRISCADOR PARA SIERRAS CINTAS - TIMBERY SHARP-N-SET
COMO NUEVO - SIN USARPARA SIERRAS CINTAS DE 1" A 1-1/2" CON 7/8" DE ESPACIO ENTRE LOS DIENTES (TOOTH SPACING)VOLTAGE 115/230 VAC
FRECUENCY: 50 - 60 HZ
PHASE 1
FULL LOAD AMPS: 5.0 / 2.5 A
DIAGRAM # 5520-989MANUAL DEL USUARIO INCLUIDO