Identificador: 1008
Abierta
Descripción
PARTE: 2DO-DT610 - ESPIGADORA DOBLE - DE MESA - CAPACIDAD 6 - 8 PIES - DT-610
NUEVA CON GARANTIA
ESCUADRA Y CORTA A LARGO, ARRIBA Y DEBAJO DE LA PUERTA O TABLERO
2 SIERRAS CORTA
2 SIERRAS SCORING
CORTE LIMPIO EN AMBOS LADOS
Features and Benefits:
Easy to load table - Safely locks in place while loading.
One operator can easily load the door or panel - Greater efficiency.
One stationary head and one movable head - Easy to change.
Fixed side, saw tilts; Movable side, saw is fixed - Allows for beveling.
Dust collection ports for all four saw blades - Easier cleanup.
Two 6" saw blades score the bottom prior to the main blades - For a clean cut.
Two 12" main saw blades are used with a 5 HP motor - Producing a quality cut.
Dust Collection Kit: Can be hooked up to a central dust collection system.
Specifications:
Working Length 6’ – 8’
Working Width 1’ – 4’
Working Thickness 3”
Left (fixed) Saw Blade Motor: 2 HP 1 PH; 5 HP 1 PH - Motor Tilting Degree: 90° - 85°
Right (mobile - manual adjustment) Saw Blade Motor: 2 HP 1 PH; 5 HP 1 PH - Motor Fixed: 90°
Digital Display (horizontal) 3
Cylinder Pressing - Push Down x 2 (manual)
Working Desk (linear slide) – 5’ x 4’
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 2MA-FP-5285CB – LIJADORA - CALIBRADORA DE METAL – 52” ANCHO - 2 LIJAS
PARTE:
2MA-FP-5285CB – LIJADORA - CALIBRADORA DE METAL – 52” ANCHO - 2 LIJAS
NUEVA CON
GARANTIA
Standard
Features:
Abrasive
belt size: 52” x 86”
10”
diameter heavy duty drum for perfect graining
6-1/8”
wide opening for max. workpiece thickness 6”
Motorized
Table Lift with LED display
Variable
Speed Conveyor
Conveyor
Forward & Reverse
Belt
Safety Overtravel Switches
Electronic
Eye Belt Tracking. Belt tracking adjusting lever ( Belt T...
AMXmachinery
SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14
PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS 14” - PISTORIUS EMN-14Used - Excellent conditions – Used for samples only2 Motors 2 HP,
208/230/460 Volts, 60 Hz, 3450 RPMSaw harbor
5/8"Dust exits 2 of
4" diameter, requres aprox. 850 CFMAir use 72 CFM at
65 PSI based in 15 cycles/minTable height
36-1/8" (917 mm) Pneumatic pedalEach cut takes 4 to
6 seconds
Weight 405 lbs (184 kg)
AMXmachinery
LINEA DE PINTURA CEFLA
PARTE: 12000 - LINEA DE PINTURA - CEFLAEN MUY BUENAS CONDICIONESPara mas informacion contectenosComponents:Cefla Sorbini Infeed conveyor T/S-R-VS (2010) 220V 1.6KWCefla Falcioni Unospray 1300 (2005) 220V 10.5KW Cefla Sorbini Outfeed conveyor (2005) 220V 0.4 KW 510KgPresurized Water Heated Spray Cabin LPS 50-70 (2010) 220V 6.2KW 5m x 7mCefla Sorb...
AMXmachinery
PARTE: 12607 - SIERRA RAJADORA – 1 SIERRA - POWERMATIC
PARTE: 12607 - SIERRA RAJADORA – 1 SIERRA - POWERMATICUsada – Buenas condicionesManufacturer Specifications - Seven pressure rollers with dual anti-kickback pawls help prevent stock discharge- 12" main blade is supported by heat-treated arbor for rigidity and support- Large 18" rip and 3-7/8" depth of cut capacities for virtually any job- Feed chain blocks are constructed of heat-treated cast iron with auto-oiler for accuracy- Variable feed speeds accommodate different types of stock- Auto-o...