Identificador: 90
Abierta
Descripción
PARTE # 2EV-8100 – STANDARD PANEL FEEDER – EVANS 8100
Hydraulic 4 Corner Cable Lift
Touch Screen Controls
Laser Height Sensor
NEMA 12 Enclosure
460 Volt Fused Disconnect
5 HP Hydraulic Power Pack
Panel Size: up to 5’x10’
Panel Thickness: 3/8” to 1-1/2”
Lift Capacity: 7000 pounds
Electrical: 230/460 V, 3 PH, 60 Hz, 480 volt, 3 phase, 60 hz
Options:
- Upgrade for 5’ x 10’ or 5’ x 12’ materials and increase lift capacity to 8000 pounds. (option 8200)
- Upgrade for remote hand pendant controls / “go” button
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: AMX-10157 - EXTRACTOR DE TURBINA - 7.5 HP
PARTE: AMX-10157 - EXTRACTOR DE TURBINA - 7.5 HP
USADO - BUENAS CONDICIONES
MOTOR 7.5 HP, 208-230/460V, 3
FASES, 3450 RPM, BALDOR
ENTRADA REDONDA: 8.5”
SALIDA RECTANGULAR: 4” X 8”
MEDIDAS TOTALES: 23” ANCHO X 21”
FONDO X 21” ALTO
AMXmachinery
TROMPO CON ALIMENTADOR – 5 HP - POWERMATIC
PARTE: 12285 – TROMPO CON
ALIMENTADOR – 5 HP - POWERMATICUSADO – BUENAS CONDICIONES
TS-80 / 9179083
AMXmachinery
EXTRACTOR DE TUBO - ASPAS 14” DIAMETRO - MOTOR 1/3 HP
PARTE: AMX-10128 - EXTRACTOR DE TUBO - ASPAS 14” DIAMETRO
- MOTOR 1/3 HP
USADO - BUENAS CONDICIONES
MOTOR 1/3 HP, 280/440V, 3 FASES
MEDIDAS: 14” DIAMETRO INTERIOR X 16”
DIAMETRO EXTERIOR X 14” FONDO
4,500.00 MXN
AMXmachinery
PARTE: 2CA-CM-8CAR - TALLADORA DE MADERA
PARTE: 2CA-CM-8CAR - TALLADORA DE MADERAFeatures:Special design 3D carving machine by menu copy with template for wood, artistic, and plastic, etc.Fix the template at middle axis, the other 8 axis spindle will follow it and carving the material when it is automatic rotated 360 degrees.The spindle motor controlled by high frequency inverter from 9,000 to 12,000 RPM for best carving effects.Cutter head can be adjusted at x or y direction.Carving angle can be adjusted at 30 to 120 degrees.Custom o...